 |
|||
|
|
|||
|
Page Title:
FRONT WINCH HYDRAULIC HOSES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0221 00
FRONT WINCH HYDRAULIC HOSES REPLACEMENT (Contd)
REMOVAL
CAUTION
Plug all openings immediately after disconnecting hoses and
fittings to prevent dirt and dust from entering hydraulic system.
Contamination of the hydraulic system may result in damage to
equipment. Remove plugs before installation.
NOTE
Have drainage container ready to catch oil.
Tag all hoses for installation.
1.
Remove hose (7) from elbow (17).
2.
Remove hose (5) from fitting (4).
3.
Remove fitting (4) from elbow (3).
4.
Remove elbow (3) and O-ring (2) from pump (1). Discard O-ring (2).
5.
Remove elbow (17) and O-ring (18) from pump (1). Discard O-ring (18).
6.
Remove hose (5) from elbow (13).
7.
Remove hose (7) from elbow (14).
8.
Remove locknut (9), screw (15), and mounting bracket (10) from crossmember (16). Discard locknut (9).
9.
Remove locknut (12), screw (6), and clamps (8) and (11) from mounting bracket (10). Discard locknut (12).
10.
Remove clamp (11) from hose (7).
11.
Remove clamp (8) from hose (5).
INSTALLATION
1.
Apply sealant to male threads of elbows (3), (13), (14) and (17), and fitting (4).
2.
Install new O-ring (18) and elbow (17) on pump (1).
3.
Install new O-ring (2) and elbow (3) on pump (1).
4.
Install fitting (4) on elbow (3).
5.
Install hose (5) on fitting (4).
6.
Install hose (7) on elbow (17).
7.
Route hoses (5) and (7) to elbows (13) and (14).
8.
Install hose (5) on elbow (13).
9.
Install hose (7) on elbow (14).
10.
Install mounting bracket (10) on crossmember (16) with screw (15) and new locknut (9).
11.
Position clamp (8) on hose (5).
12.
Position clamp (11) on hose (7).
13.
Install clamps (8) and (11) on mounting bracket (10) with screw (6) and new locknut (12).
14.
Fill hydraulic oil reservoir to proper level (WP 0213 00).
15.
Operate winch (TM 9-2320-386-10) and check for leaks.
0221 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version