SEATBELT POSTS AND BRACKETS REPLACEMENT - continued

TM 9-2320-386-24-1-1

0210 00

SEATBELT POSTS AND BRACKETS REPLACEMENT (Contd)

REMOVAL

1. Remove locknut (18), washer (13), support bracket (17 ), screw (14), washer (13), tether (15), and

sleeve (16) from left center reinforcement bracket (19). Discard locknut (18).

2. Remove locknut (18), washer (13), support bracket (17), screw (14), washer (13), support

bracket (17), and sleeve (16) from right center reinforcement bracket (20). Discard locknut (18).

3. Remove sixteen locknuts (29), washers (11), two upper reinforcement plates (30), lower

reinforcement plates (28), sixteen screws (12), washers (11), and left and right center reinforcement

brackets (19) and (20) from rear cab wall (6). Discard locknuts (29).

4. Remove two locknuts (4), washers (5), screws (8), and washers (5) from upper holes of center

seatbelt post (7) and rear cab wall (6). Discard locknuts (4).

5. Remove six screws (10), washers (9), and center post (7) from rear cab wall (6).

6. Remove two locknuts (22), screws (3), and reinforcement plate (21) from rear cab wall (6). Discard

locknuts (22).

7. Remove plain-assembled nut (1), washer (2), screw (23), and resilient mount (24) from support

bracket (32). Discard plain-assembled nut (1).

8. Remove two locknuts (31), screws (25), and support bracket (32) from rear cab wall (6). Discard

locknuts (31).

9. Remove two locknuts (31), screws (27), and NBC bracket (26) from rear cab wall (6). Discard

locknuts (31).

NOTE

Left and right seatbelt post removal is the same. Steps 10 through

14 cover the left side.

10. Remove locknut (48), washer (44), sleeve (47), screw (43), washer (44), and tether (51) from left

reinforcement bracket (50). Discard locknut (48).

11. Remove four locknuts (49), screws (45), washers (46), and left reinforcement bracket (50) from rear

cab wall (6). Discard locknuts (49).

12. Remove two locknuts (36), washers (37), screws (40), and washers (37) from upper holes of left

seatbelt post (39) and left gusset bracket (33). Discard locknuts (36).

13. Remove eight screws (42), washers (41), and left seatbelt post (39) from rear cab wall (6).

14. Remove two screws (35), washers (34), and gusset bracket (33) from rear cab wall (6) and left

reinforcement plate (38).

0210 00-2