 |
|||
|
|
|||
|
Page Title:
DRIVER'S AND COMPANION SEAT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0208 00
DRIVER'S AND COMPANION SEAT REPLACEMENT (Contd)
COMPANION SEAT REMOVAL
Remove four assembled-washer screws (5) and companion seat (1) from cab floor (6). Discard assembled-
washer screws (5).
DRIVER'S SEAT REMOVAL
1.
Remove screw (13), driver's seatbelt (14), tether (12), and washer (11) from driver's seat (2).
2.
Remove screw (8), driver's seatbelt buckle (7), tether (9), and washer (10) from driver's seat (2).
3.
Remove two assembled-washer screws (4), driver's seat (2), and base (3) from cab floor (6). Discard
assembled-washer screws (4).
DRIVER'S SEAT INSTALLATION
1.
Install driver's seat (2) and base (3) on cab floor (6) with two new assembled-washer screws (4).
CAUTION
Ensure seatbelts and tethers are installed on shoulder of screws before tightening.
2.
Install driver's seatbelt buckle (7), tether (9), and washer (10) on driver's seat (2) with screw (8).
Tighten screw (8) 30-35 lb-ft (41-47 Nm).
3.
Install driver's seatbelt (14), tether (12), and washer (11) on driver's seat (2) with screw (13).
Tighten screw (13) 30-35 lb-ft (41-47 Nm).
COMPANION SEAT INSTALLATION
Install companion seat (1) on cab floor (6) with four new assembled-washer screws (5).
0208 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version