FRONT FENDER REPLACEMENT - continued - TM-9-2320-386-24-1-10929

TM 9-2320-386-24-1-1

0204 00

FRONT FENDER REPLACEMENT (Contd)

NOTE

Right and left front fenders are replaced basically the same. This

procedure covers the left fender.

REMOVAL

1. Remove cotter pin (47) from retaining pin (46). Discard cotter pin (47).

2. Remove retaining pin (46) and brushguard strut rod (45) from mounting bracket (2).

3. Remove locknut (10), washer (9), screw (1), and mounting bracket (2) from fender (4). Discard

locknut (10).

4. Remove two nuts (44) and screws (41) from fender (4) and lower side panel (42).

5. Remove two screws (21), lockwashers (20), washers (19), and lower side panel (42) from

brushguard (40). Discard lockwashers (20).

6. Remove locknuts (24) and (22), screws (27) and (33), clamps (25) and (32), and wiring harness (16)

from fender mounting bracket (23). Discard locknuts (24) and (22).

NOTE

Perform steps 7 and 8 if vehicle is equipped with winch.

7. Remove locknut (37), screw (31), clamp (34), and wiring harness (35) from fender mounting

bracket (23). Discard locknut (37).

8. Remove four locknuts (50), washers (51), screws (52), splash guard (49), and splash guard

retainer (48) from fender mounting bracket (23). Discard locknuts (50).

9. Remove three nuts (11), lockwashers (12), washers (13), screws (30), six washers (29), three springs (28),

and washers (26) from fender (4) and fender mounting bracket (23). Discard lockwashers (12).

10. Remove three assembled-washer screws (5) from fender (4) and cowl (8). Discard assembled-washer

screws (5).

NOTE

Assistant will help with step 11.

11. Remove two locknuts (6), washers (7), screws (17), fender (4), and fender mount spacer (43) from

fender mounting bracket (23), bracket (18), and cowl (8). Discard locknuts (6).

12. Remove two screws (15), lockwashers (14), and bracket (18) from cowl (8). Discard lockwashers (14).

13. Remove four locknuts (38), screws (36), and fender mounting bracket (23) from rail (39). Discard

locknuts (38).

14. Remove anti-squeak material (3) from cowl (8). Discard anti-squeak material (3).

0204 00-2