 |
|||
|
|
|||
|
Page Title:
MANUAL SHUTOFF VALVE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0185 00
MANUAL SHUTOFF VALVE REPLACEMENT (Contd)
REMOVAL
.WARNING.
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Eyeshields must be worn when releasing compressed air. Failure
to do this may result in injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal parts.
1.
Disconnect hose (5) from elbow (4).
2.
Remove elbow (4) from coupling (3).
3.
Remove coupling (3) from manual shutoff valve (2).
4.
Remove manual shutoff valve (2) from adapter (1).
INSTALLATION
NOTE
Remove all plugs prior to installation of air lines.
1.
Apply sealant to male threads of elbow (4) and manual shutoff valve (2).
2.
Install manual shutoff valve (2) on adapter (1).
3.
Install coupling (3) on manual shutoff valve (2).
4.
Install elbow (4) on coupling (3).
5.
Connect hose (5) to elbow (4).
6.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
2
3
4
1
5
END OF WORK PACKAGE
0185 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version