 |
|||
|
|
|||
|
Page Title:
CTIS WHEEL VALVE REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0177 00
CTIS WHEEL VALVE REPAIR (Contd)
INSTALLATION
1.
Install wheel valve (13) on wheel valve mounting plate (3) with four screws (4) and new
locknuts (11). Tighten locknuts (11) 18 lb-ft (24 Nm).
2.
Connect air line (10) on adapter (8) and tighten nut (9) at the same time as wheel valve mounting
plate (3) is installed on studs (5) with two nuts (2).
3.
Install air line (1) to elbow (19) on wheel valve (13) and tighten nut (20).
4.
Install stone shield (17) on two studs (7) with two nuts (14). Tighten nuts (14) 60-80 lb-ft
(81-108 Nm).
5.
Install stone shield (17) on flange (6) with two new lockwashers (15) and screws (16). Tighten
screws (16) 81-104 lb-ft (110-141 Nm).
6.
Remove valve cap (18) from air valve (12), inflate tire, and install valve cap (18).
7.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
8.
Operate CTIS (TM 9-2320-386-10) and check for air leaks.
1
5
2
3
4
6
20
11
12
19
18
17
10
9
13
8
7
15
16
14
END OF WORK PACKAGE
0177 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version