 |
|||
|
|
|||
|
Page Title:
CTIS WHEEL VALVE AND FILTER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0176 00
CTIS WHEEL VALVE AND FILTER MAINTENANCE (Contd)
INSTALLATION
1.
Apply sealant to male threads of in-line filter (15), connectors (6) and (16), elbows (3) and (18), hollow
stud (11), and turret valve (13).
2.
Install elbows (3) and (18) on wheel valve (2).
3.
Install wheel valve (2) on mounting plate (9) with four screws (10) and new locknuts (5). Tighten
locknuts (5) 18 lb-ft (24 Nm).
4.
Install elbows (8) and (14) on hollow stud (11) and turret valve (13).
5.
Install connector (6) on elbow (8).
NOTE
Arrow on in-line filter must point toward wheel valve.
6.
Install connector (16) and in-line filter (15) on elbow (14).
7.
Install air line (17) on elbow (18) and connector (16).
8.
Install mounting plate (9) on wheel (12) with two nuts (7).
9.
Install air line (4) on elbow (3) and connector (6).
10.
Install stone shield (1) on wheel (12) with two nuts (19), new lockwashers (20), and screws (21). Tighten
screws (21) 81-104 lb-ft (110-141 Nm) and nuts (19) 60-80 lb-ft (81-108 Nm).
11.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
0176 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version