 |
|||
|
|
|||
|
Page Title:
FRONT WHEEL HUB MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0172 00
FRONT WHEEL HUB MAINTENANCE (Contd)
CLEANING AND INSPECTION
WARNING
Skysol-100 mixture is combustible. Use mechanical ventilation whenever
product is used in a confined space, is heated above ambient
temperatures, or is agitated. DO NOT use or store near heat, sparks,
flame, or other ignition sources. Keep container sealed when not in use.
Contact with Skysol-100 may cause skin irritation. Use chemical resistant
gloves. In case of skin contact, remove any contaminated clothing and
wash skin thoroughly with soap and water. Wash contaminated clothing
before reuse. Eye contact may cause irritation, tearing, or blurring of
vision. Use face shield or goggles when eye contact may occur. In case of
eye contact, flush eyes with large amounts of water for at least fifteen (15)
minutes or until irritation subsides. Inhalation may cause irritation to
upper respiratory passages. DO NOT have food or drink in the vicinity.
1.
Clean hub (21), inner bearing (17), outer bearing (25), and adapter (5) thoroughly with Skysol-100
and dry with a lint-free cloth.
2.
Inspect outer bearing (25), inner bearing (17), outer bearing cup (24), inner bearing cup (18), and
seal retainers (23) and (19) for scoring, nicks, burrs, and wear. Replace part(s) if damaged.
3.
Inspect hub (21), drum (4), and adapter (5) for cracks, wear, or breaks. Replace part(s) if damaged.
NOTE
Perform step 4 if spindle was removed.
4.
Clean all adhesive from spindle (30), tube (12), air line (31), and steering knuckle studs (34).
6
9
7
5
4
8
3
2
1
10
13
11
12
17
19
16
15 14
20
18
25
21
22
24 23
32
33
31
29
30
28
27
26
34
0172 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version