 |
|||
|
|
|||
|
Page Title:
AIR COMPRESSOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0169 00
AIR COMPRESSOR REPLACEMENT (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Eyeshields must be worn when releasing compressed air. Failure
to do so may result in injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings to prevent
dirt from entering and causing damage to internal parts. Remove all
plugs prior to installation.
NOTE
Tag air lines and hoses for installation.
1.
Remove nut (13) and tube (14) with sleeve (12) from elbow (8).
2.
Remove nut (22) and tube (21) with sleeve (23) from elbow (24).
3.
Remove screw (32), washer (31), screw (34), and washer (33) from mounting bracket (28) and
engine (18).
4.
Remove two screws (30), washers (29), and mounting bracket (28) from air compressor (39).
5.
Remove clamp (49) and hose (48) from strainer (43).
6.
Remove two screws (19), washers (20), governor (15), and gasket (25) from air compressor (39).
Discard gasket (25).
7.
Remove nut (6) and tube (7) from elbow (26).
8.
Remove nut (2) and tube (1) from adapter (3).
9.
Remove nut (45), tube (44), and sleeve (46) from elbow (47). Discard sleeve (46).
10.
Remove connector (40) from elbow (41).
11.
Remove screw (35), washer (36), clamp (38), and hose (37) from air compressor (39).
12.
Remove two screws (9), washers (10), air compressor (39), and gasket (17) from housing (11).
Discard gasket (17).
13.
Remove elbow (26) from port (27).
14.
Remove adapter (3) from port (4).
15.
Remove elbow (47) from port (5).
16.
Remove elbow (41) from port (42).
17.
Remove elbows (8) and (24) from governor (15).
18.
Remove valve (16) from governor (15).
0169 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version