 |
|||
|
|
|||
|
Page Title:
AIR RESERVOIR DRAINVALVES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0166 00
AIR RESERVOIR DRAINVALVES REPLACEMENT (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Eyeshields must be worn when releasing compressed air. Failure
to do so may result in injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal parts.
Remove all plugs prior to installation.
1.
Remove drainvalve (5) from air reservoir (4).
2.
Remove drainvalve (6) from air reservoir (3).
3.
Remove drainvalve (14) from fitting (13) on bracket (15).
NOTE
Note position of elbows for installation.
4.
Remove nuts (10) and (18), air tube (16) with inserts (11) and (17), and sleeves (9) and (19) from
elbows (7) and (20).
5.
Remove elbow (20) from air reservoir (3).
6.
Remove elbow (7) from fitting (13).
7.
Remove nut (8), fitting (13), and lockwasher (12) from bracket (15).
8.
Remove nut (2), screw (21), and bracket (15) from frame rail (1).
INSTALLATION
1.
Apply sealant to male threads of drainvalves (5), (6), and (14), and elbows (7) and (20).
2.
Install bracket (15) on frame rail (1) with screw (21) and nut (2).
3.
Install lockwasher (12) and fitting (13) on bracket (15) with nut (8).
4.
Install elbow (7) on fitting (13).
5.
Install elbow (20) on air reservoir (3).
6.
Install air tube (16) with inserts (11) and (17) and sleeves (9) and (19) on elbows (7) and (20) with
nuts (10) and (18).
7.
Install drainvalve (14) on fitting (13).
8.
Install drainvalve (6) on air reservoir (3).
9.
Install drainvalve (5) on air reservoir (4).
10.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
0166 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version