 |
|||
|
|
|||
|
Page Title:
AIR-HYDRAULIC BOOSTER VENT LINE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0159 00
AIR-HYDRAULIC BOOSTER VENT LINE REPLACEMENT (Contd)
REMOVAL
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal parts.
Remove all plugs prior to installation.
1.
Loosen two nuts (6) and remove air-hydraulic booster vent lines (5) and (12) from elbows (7) on
air-hydraulic boosters (8).
2.
Remove tiedown strap (1), locknut (11), screw (2), and clamp (3) from crossmember (4). Discard
locknut (11) and tiedown strap (1).
3.
Remove air-hydraulic booster vent lines (5), (9), and (12) from tee (10).
4.
Remove tiedown strap (16), four screws (13), clamps (14), and air-hydraulic booster vent line (9)
from cab (15) and vehicle. Discard tiedown strap (16).
INSTALLATION
1.
Install air-hydraulic booster vent lines (5), (9), and (12) on tee (10).
2.
Route air-hydraulic booster vent line (5) along crossmember (4) and secure with new tiedown
strap (1), clamp (3), screw (2), and new locknut (11).
3.
Install air-hydraulic booster vent lines (5) and (12) to elbows (7) on air-hydraulic boosters (8) and
tighten two nuts (6).
4.
Install four clamps (14) on air-hydraulic booster vent line (9) and other two vent lines and secure to
cab (15) with four screws (13).
5.
Secure three vent lines into a loop with new tiedown strap (16).
6.
Install air hydraulic booster skid plates (WP 0157 00).
0159 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version