 |
|||
|
|
|||
|
Page Title:
MASTER CYLINDER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0155 00
MASTER CYLINDER REPLACEMENT (Contd)
INSTALLATION
1.
Apply sealant to male threads of brake lines (2) and (15) and elbows (24) and (25).
2.
Install elbows (24) and (25) on master cylinder (19).
3.
Install brake lines (2) and (15) on differential valve (20) and tighten nuts (13) and (16).
4.
Install master cylinder (19) and differential valve bracket (21) on mounting bracket (3) with two
new lockwashers (17) and (23) and screws (18) and (22).
5.
Install brake line (2) on master cylinder (19) and tighten nut (1).
6.
Install brake line (15) on master cylinder (19) and tighten nut (14).
7.
Install boot (5) and pushrod (6) on mounting bracket (3).
8.
Install clevis (10) on pushrod (6) and tighten nut (11).
9.
Install clevis (10) on lever (4) with retaining pin (12), washer (9), spring (7), and new cotter pin (8).
10.
Install tube (28) and sleeve (26) on elbow (24) and tighten nut (27).
11.
Install tube (31) and sleeve (29) on elbow (25) and tighten nut (30).
12.
Bleed service brakes (WP 0154 00) and road test vehicle.
0155 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version