 |
|||
|
|
|||
|
Page Title:
MASTER CYLINDER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0155 00
MASTER CYLINDER REPLACEMENT (Contd)
REMOVAL
CAUTION
When disconnecting hydraulic lines and hoses, cap and plug all
openings to prevent dirt and dust from entering. Contamination of
the brake system may result in damage to equipment. Remove
caps and plugs prior to installation.
NOTE
Have drainage container ready to catch brake fluid.
Tag all brake lines for installation.
1.
Loosen nut (3) and remove tube (4) and sleeve (2) from elbow (1).
2.
Loosen nut (6) and remove tube (7) and sleeve (5) from elbow (8).
3.
Loosen nut (10) and remove brake line (11) from master cylinder (9).
4.
Loosen nut (23) and remove brake line (24) from master cylinder (9).
5.
Loosen nuts (22) and (25) and remove brake lines (11) and (24) from differential valve (28).
6.
Remove two screws (30), lockwashers (31), and differential valve bracket (29) from master
cylinder (9) and bracket (12). Discard lockwashers (31).
7.
Remove cotter pin (17) and washer (18) from retaining pin (21). Discard cotter pin (17).
8.
Remove retaining pin (21), clevis (19), and spring (16) from lever (13).
9.
Loosen nut (20) and remove clevis (19) from pushrod (15).
10.
Remove pushrod (15) and boot (14) from master cylinder mounting bracket (12).
11.
Remove two screws (27), lockwashers (26), and master cylinder (9) from mounting bracket (12).
Discard lockwashers (26).
12.
Remove elbows (1) and (8) from master cylinder (9).
0155 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version