AXLE BREATHER MAINTENANCE

TM 9-2320-386-24-1-1

0151 00

AXLE BREATHER MAINTENANCE (Contd)

NOTE

Front and rear axle housing breathers are maintained the same.

This procedure covers the front axle housing breather.

REMOVAL

Remove breather (1) from axle housing (2).

CLEANING

.WARNING.

Skysol-100 mixture is combustible. Use mechanical ventilation whenever

product is used in a confined space, is heated above ambient

temperatures, or is agitated. DO NOT use or store near heat, sparks,

flame, or other ignition sources. Keep container sealed when not in use.

Contact with Skysol-100 may cause skin irritation. Use chemical resistant

gloves. In case of skin contact, remove any contaminated clothing and

wash skin thoroughly with soap and water. Wash contaminated clothing

before reuse. Eye contact may cause irritation, tearing, or blurring of

vision. Use face shield or goggles when eye contact may occur. In case of

eye contact, flush eyes with large amounts of water for at least fifteen (15)

minutes or until irritation subsides. Inhalation may cause irritation to

upper respiratory passages. DO NOT have food or drink in the vicinity.

Clean breather (1) with Skysol-100 and dry with clean rag.

INSTALLATION

Apply sealant to male threads of breather (1).

Install breather (1) on axle housing (2).

END OF WORK PACKAGE

0151 00-2