 |
|||
|
|
|||
|
Page Title:
UNIVERSAL JOINT MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0149 00
UNIVERSAL JOINT MAINTENANCE (Contd)
NOTE
Align marks on yokes before assembling bearing caps in shaft yoke.
2.
Cap type:
a. Install four new seals (8) on spider cross journals (9).
b. Install lubrication fitting (10) on spider cross (7).
c. Install spider cross (7) in upper yoke flange loop (5) with lubrication fitting (10) angled away
from yoke flange (6).
d. Apply GAA grease in bearing caps (3) to hold bearing (4) in place during assembly.
e. Install two bearing caps (3) on spider cross journal (9) and upper yoke flange loop (5).
f. Position two locking straps (2) on bearing caps (3) and install with four screws (1). Tighten
screws (1) 18-25 lb-ft (24-34 Nm). Bend tabs of locking straps (2) up to hold screws (1) in place.
NOTE
Align marks on yokes before assembling bearing caps in shaft yoke.
g. Position shaft yoke (11) on spider cross journals (9) and install two bearing caps (3) with new
locking straps (2) and four screws (1). Tighten screws (1) 18-25 lb-ft (24-34 Nm).
h. Bend tabs of locking straps (2) up to hold screws (1) in place.
i. Shaft yokes (11) and yoke flange (6) should move smoothly and have no free play.
j. Install propeller shaft (WP 0147 00).
k. Install intermediate propeller shaft (M36A2) (WP 0148 00).
8
1
9
2
7
3
10
1
4
2
3
6
5
9
6
7
3
11
2
1
CAP TYPE
END OF WORK PACKAGE
0149 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version