 |
|||
|
|
|||
|
Page Title:
UNIVERSAL JOINT MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0149 00
UNIVERSAL JOINT MAINTENANCE (Contd)
CLEANING AND INSPECTION
.WARNING.
Skysol-100 mixture is combustible. Use mechanical ventilation whenever
product is used in a confined space, is heated above ambient
temperatures, or is agitated. DO NOT use or store near heat, sparks,
flame, or other ignition sources. Keep container sealed when not in use.
Contact with Skysol-100 may cause skin irritation. Use chemical resistant
gloves. In case of skin contact, remove any contaminated clothing and
wash skin thoroughly with soap and water. Wash contaminated clothing
before reuse. Eye contact may cause irritation, tearing, or blurring of
vision. Use face shield or goggles when eye contact may occur. In case of
eye contact, flush eyes with large amounts of water for at least fifteen (15)
minutes or until irritation subsides. Inhalation may cause irritation to
upper respiratory passages. DO NOT have food or drink in the vicinity.
1.
Clean all parts with Skysol-100 and dry with clean rag.
2.
Inspect yokes (3) for breaks, cracks, and bends. Replace yokes (3) if damaged.
3.
Inspect snapring grooves (1) for damage. Replace yoke flange (2) or yoke (3) if damaged.
4.
Inspect shafts (4) for bends, cracks, damaged threads (6), and splines (5). Replace shaft (4) if
damaged.
5.
Inspect bearings (7) in bearing cap (8) (TM 9-214). Replace U-joint (spider cross (9), bearing (7), and
bearing caps (8)) if damaged.
1
3
2
1
4
7
5
6
ASSEMBLY
1.
Snapring type:
a. Apply thick film of GAA grease to bearing caps (8) to hold bearings (7) in place during
assembly.
b. Install four new rubber seals (12) on spider cross journals (13).
c. Install spider cross journals (13) in yoke flange (2). Press two bearing caps (8) into yoke flange
loops (11).
0149 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version