 |
|||
|
|
|||
|
Page Title:
TRANSMISSION OIL DIPSTICK TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0138 00
TRANSMISSION OIL DIPSTICK TUBE REPLACEMENT (Contd)
REMOVAL
1.
Lift soundproof material on passenger side floorboard to locate access door (1).
2.
Open access door (1) and remove dipstick (2) from dipstick tube (6).
NOTE
Have container ready to catch oil.
3.
Remove nut (5), screw (3), clamp (4), and dipstick tube (6) from bracket (7).
4.
Remove tiedown strap (10) from dipstick tube (6) and lead 324 (11). Discard tiedown strap (10).
.WARNING.
Accidental or intentional introduction of liquid contaminants into
the environment is in violation of state, federal, and military
regulations. Refer to Army POL (WP 0001 00) for information
concerning storage, use, and disposal of these liquids. Failure to
do so may result in injury or death.
5.
Remove dipstick tube (6) from transmission oil pan (9).
6.
Wipe dipstick tube (6) and opening (8) with clean, dry rag.
INSTALLATION
1.
Install dipstick tube (6) on transmission oil pan (9).
2.
Install dipstick tube (6) and clamp (4) on bracket (7) with screw (3) and nut (5).
3.
Install lead 324 (11) on dipstick tube (6) with new tiedown strap (10).
4.
Install dipstick (2) in dipstick tube (6) and close access door (1).
5.
Reposition soundproof material on passenger side floorboard.
6.
Fill transmission to proper oil level (WP 0022 00).
0138 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version