 |
|||
|
|
|||
|
Page Title:
TRANSMISSION VENT LINE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0136 00
TRANSMISSION VENT LINE REPLACEMENT (Contd)
TRANSMISSION VENT LINE REMOVAL
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal parts.
Remove all plugs prior to installation.
1.
Loosen nut (3) and remove transmission vent line (2) from elbow (4) on transmission (1).
2.
Remove tiedown strap (8), four screws (5), clamps (6), and transmission vent line (2) from cab (7)
and vehicle. Discard tiedown strap (8).
TRANSMISSION VENT LINE INSTALLATION
1.
Install transmission vent line (2) to elbow (4) on transmission (1) and tighten nut (3).
2.
Install four clamps (6) on transmission vent line (2) and other two vent lines and secure to cab (7)
with four screws (5).
3.
Secure three vent lines into a loop with new tiedown strap (8).
4.
Install rear cab tunnel and toeboard (WP 0207 00).
1
~
4
3
2
6
5
7
8
2
END OF WORK PACKAGE
0136 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version