 |
|||
|
|
|||
|
Page Title:
TRANSMISSION SELECT LEVER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0134 00
TRANSMISSION SELECT LEVER MAINTENANCE (Contd)
REMOVAL
1.
Remove twelve screws (16) and two side plates (15) from supports (21).
2.
Disconnect wiring harness plug with lead 40 (14) from connector (13).
3.
Remove four screws (19) and lockwashers (20) from two supports (21) and select lever (1). Discard
lockwashers (20).
4.
Raise select lever (1) from two supports (21) to access shift cable (5).
5.
Remove lockpin (2) from connecting link (3). Discard lockpin (2).
6.
Remove two nuts (17), lockwashers (18), clamp (12), shift cable (5), spacer (11), and two screws (6)
from select lever (1). Discard lockwashers (18).
7.
Remove plain-assembled nut (10), screw (8), ground (GND) wire 99A (9), and lockwasher (7) from
select lever (1). Discard lockwasher (7) and plain-assembled nut (10).
8.
Disconnect shift cable (5) with connecting link (3) from select lever (1).
9.
Remove select lever (1) from two supports (21).
10.
Loosen jamnut (4) and remove connecting link (3) from shift cable (5).
DISASSEMBLY
1.
Remove four screws (22), cover plate (23), and cover seal (24) from select lever (1).
2.
Remove lamp (25) from bracket (26).
0134 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version