 |
|||
|
|
|||
|
Page Title:
TRANSMISSION SHIFT CABLE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0132 00
TRANSMISSION SHIFT CABLE MAINTENANCE (Contd)
REMOVAL
1.
Remove cotter pin (7) and shift cable (3) from manual control lever (8). Discard cotter pin (7).
2.
Remove two nuts (6), lockwashers (5), U-bolt (1), shift cable (3), and spacer (2) from bracket (4).
Discard lockwashers (5).
3.
Loosen jamnut (11) and remove connecting link (10) from shift cable (3).
4.
Remove shift cable (3) from vehicle.
INSTALLATION
1.
Route shift cable (3) to transmission (9) through hole in cab tunnel.
2.
Install connecting link (10) to center of threads on end of shift cable (3) to allow for further
adjustment. Do not tighten jamnut (11).
3.
Install spacer (2) and shift cable (3) on bracket (4) with U-bolt (1), two new lockwashers (5), and
nuts (6).
ADJUSTMENT
1.
Move manual control lever (8) to full forward 1 (first) gear position and adjust connecting link (10) in
or out on threads of shift cable (3) to align with hole in lever (8) and tighten jamnut (11).
2.
Install connecting link (10) on lever (8) with new cotter pin (7).
3.
Install transmission select lever (WP 0134 00).
1
3
2
4
11
5
6
10
8
9
7
END OF WORK PACKAGE
0132 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version