 |
|||
|
|
|||
|
Page Title:
BATTERY BOX MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0123 00
BATTERY BOX MAINTENANCE (Contd)
REMOVAL
1.
Remove battery box (11) from two supports (10).
2.
Remove five locknuts (1), washers (2), screws (21), and STE/ICE-R shunt bracket (3) from battery
box (11). Discard locknuts (1).
3.
Remove locknut (12), washer (13), chain hook (15), and screw (4) from battery box (11). Discard
locknut (12).
4.
Remove two pins (14) from chain hooks (15) and three chain hooks (15) from two weldless
chains (16).
5.
Remove four locknuts (8), screws (5), washers (6), and two bow handles (7) from battery box (11).
Discard locknuts (8).
6.
Remove four locknuts (19), washers (20), screws (18), and two angle brackets (17) from battery
box (11).
INSPECTION
1.
Inspect battery box (11), STE/ICE-R shunt bracket (3), bow handles (7), angle brackets (17), and
supports (10). Replace battery box (11), STE/ICE-R shunt bracket (3), and angle brackets (17) if
cracked. Repair or replace cracked bow handles (7) and supports (10).
2.
Inspect battery box (11), STE/ICE-R shunt bracket (3), bow handles (7), angle brackets (17), and
supports (10) for corrosion. Clean battery box (11), STE/ICE-R shunt bracket (3), bow handles (7),
angle brackets (17), and supports (10) if corroded. For cleaning instructions, refer to TM 9-6140-
200-14.
3.
Inspect decals (9) for legibility. If illegible, install new decals (9).
REPAIR
For repair welding of bow handles (7) or supports (10), refer to TM 9-237.
INSTALLATION
1.
Install STE/ICE-R shunt bracket (3) on battery box (11) with five screws (21), washers (2), and new
locknuts (1).
2.
Position battery box (4) on two supports (10).
3.
Install two angle brackets (17) on battery box (11) with four screws (18), washers (20), and new
locknuts (19).
4.
Install two bow handles (7) on battery box (11) with four washers (6), screws (5), and new
locknuts (8).
5.
Install two pins (14) on chain hooks (15) and chain hooks (15) on weldless chains (16).
6.
Install two weldless chains (16) on chain hook (15) and install chain hook (15) on battery box (11)
with screw (4), washer (13), and new locknut (12).
7.
Install STE/ICE-R shunt (WP 0124 00).
8.
Install batteries (WP 0122 00).
0123 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version