 |
|||
|
|
|||
|
Page Title:
BATTERY CABLE AND CLAMPS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0121 00
BATTERY CABLE AND CLAMPS REPLACEMENT (Contd)
REMOVAL
1.
Remove nut (18), screw (21), and terminal clamp (19) from battery negative () post (20).
2.
Remove nut (5), screw (2), and terminal clamp (4) from battery positive (+) post (23).
3.
Remove nut (14), screws (12), and terminal clamp (13) with positive battery cable 49A (10), positive
battery cable (9), and connector (7) with leads 770E and 770V from battery positive terminal (15).
4.
Remove nuts (6) and (16), screws (3) and (22), and two terminal clamps (4) and (19) from jumper
cable (17).
5.
Remove nut (25), screw (26), and terminal clamp (28) from battery negative (-) post (24).
6.
Remove nut (29), screw (27), and battery ground cable 7A (1) from terminal clamp (28).
7.
Remove nut (8), screw (11), connector (7) with leads 770E and 770V, positive battery cable (9), and
cable 49A (10).
INSTALLATION
1.
Clean battery posts (15), (20), (23), and (24) and terminal clamps (4), (19), (13), and (28). For
general cleaning instructions, refer to (WP 0383 00).
2.
Install terminal clamps (4) and (19) on jumper cable (17) with screws (3) and (22) and nuts (6)
and (16).
3.
Install battery ground cable 7A (1) on terminal clamp (28) with screw (27) and nut (29).
4.
Install positive battery cable 49A (10), positive battery cable (9), and connector (7) with leads 770E
and 770V on terminal clamp (13) with screw (11) and nut (8).
5.
Install jumper cable (17) and terminal clamps (4) and (19) on battery positive (+) post (23) and
battery negative () post (20) with screws (2) and (21) and nut (5) and (18).
6.
Install terminal clamp (13) with positive battery cable 49A (10), positive battery cable (9), and
connector (7) with leads 770E and 770V on battery positive terminal (15) with screw (12) and
nut (14).
7.
Install terminal clamp (28) with battery ground cable 7A (1) on battery positive cable (+) post (24)
with screw (26) and nut (25).
8.
Slide battery box back into place and close battery compartment door (TM 9-2320-386-10).
0121 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version