 |
|||
|
|
|||
|
Page Title:
REAR MARKER LIGHT BRACKET REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0113 00
REAR MARKER LIGHT BRACKET REPLACEMENT (Contd)
REMOVAL
1.
Remove four locknuts (10), screws (16), lockwashers (15), clamp (11), waterproof cover (17), and trailer
receptacle (14) from marker light bracket (2). Discard locknuts (10) and lockwashers (15).
2.
Route trailer receptacle (14) back through bracket (2).
3.
Remove locknut (9), two ground (GND) leads (12), lockwasher (8), screw (20), and lockwasher (21)
from upper left corner of cargo bed (13) and bracket (2). Discard locknut (9) and lockwashers (8)
and (21).
4.
Remove five locknuts (22), lockwashers (19), screws (18), lockwashers (19), and bracket (2) from
cargo bed (13). Discard locknuts (22) and lockwashers (19).
5.
Remove locknut (5), clamp (4) with harness (3), and screw (1) from bracket (2). Discard locknut (5).
6.
Disconnect lead 21 (6) from connector with lead 489 (7).
INSTALLATION
1.
Connect lead 21 (6) to connector with lead 489 (7).
2.
Install clamp (4) with harness (3) on marker light bracket (2) with new locknut (5) and screw (1).
3.
Install marker light bracket (2) on cargo bed (13) with five new lockwashers (19), screws (18), new
lockwashers (19), and new locknuts (22).
4.
Install two ground (GND) leads (12) on upper left corner of bracket (2) and cargo bed (13) with
screw (20), new lockwasher (21), new lockwasher (8), and new locknut (9).
5.
Route trailer receptacle (14) through bracket (2) and align mounting holes.
6.
Install waterproof cover (17) and trailer receptacle (14) on bracket (2) with four new lockwashers (15),
screws (16), clamp (11), and four new locknuts (10).
7.
Install clearance light (WP 0111 00).
8.
Install battery ground cable (WP 0121 00).
0113 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version