 |
|||
|
|
|||
|
Page Title:
CLEARANCE AND REAR SIDE MARKER LIGHTS AND LAMPS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0111 00
CLEARANCE AND REAR SIDE MARKER LIGHTS AND LAMPS REPLACEMENT (Contd)
NOTE
Clearance lights have the same design as side marker lights. Only
their location on the vehicle is different. This procedure covers the
left rear side marker light.
LAMP REMOVAL
1.
Remove two screws (5) and cover (4) with lens cover (3) from side marker light (6).
2.
Remove lamp (1) from side marker light (6).
3.
If lens cover (3) is damaged, remove two push clips (2) and lens cover (3) from cover (4).
LIGHT REMOVAL
1.
Disconnect side marker light plug with lead 489 (17) from wiring harness connector with
lead 380A (18).
2.
Remove four nuts (16), lockwashers (15), screws (13), side marker light (6), and gasket (14) from
bracket (11). Discard lockwashers (15) and gasket (14).
3.
Remove two nuts (7), lockwashers (8), clamp (9), two screws (12), lockwashers (8), and bracket (11)
from rail (10). Discard lockwashers (8).
4.
Remove clamp (9) from wiring harness lead 380A (18).
LIGHT INSTALLATION
1.
Position clamp (9) on wiring harness lead 380A (18).
2.
Install bracket (11) and clamp (9) on rail (10) with two new lockwashers (8), screws (12), new
lockwashers (8), and nuts (7).
3.
Install new gasket (14) and side marker light (6) on bracket (11) with four screws (13), new
lockwashers (15), and nuts (16).
4.
Connect side marker light plug with lead 489 (17) to wiring harness connector with lead 380A (18).
LAMP INSTALLATION
1.
Install lamp (1) in side marker light (6).
2.
If removed, install lens cover (3) on cover (4) with two push clips (2).
3.
Install cover (4) with lens cover (3) on side marker light (6) with two screws (5).
4.
Connect battery ground cable (WP 0121 00).
0111 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version