 |
|||
|
|
|||
|
Page Title:
PARKING BRAKE LIGHT SWITCH REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0102 00
PARKING BRAKE LIGHT SWITCH REPLACEMENT (Contd)
REMOVAL
1.
Pull back floor insulation to gain access to the parking brake (1).
2.
Remove locknut (15), washer (16), screw (17), and parking brake switch (2) from parking brake (1).
Discard locknut (15).
3.
Remove locknut (3), lockwasher (4), and ground (GND) lead (5) from parking brake mounting
screw (14). Discard locknut (3) and lockwasher (4).
4.
Disconnect plug 67 (9) from connector 118 (10).
5.
Remove locknut (12), clamp (11), and screw (8) from cab floor (13). Discard locknut (12).
6.
Remove clamp (11) from lead (6) and pull lead (6) and grommet (7) from cab floor (13).
7.
Remove grommet (7) from lead (6).
INSTALLATION
1.
Install grommet (7) on lead (6).
2.
Install clamp (11) on lead (6) and cab floor (13) with screw (8) and new locknut (12).
3.
Connect plug 67 (9) to connector 118 (10).
4.
Install ground (GND) lead (5) on parking brake mounting screw (14) with new lockwasher (4) and
new locknut (3).
5.
Install parking brake switch (2) on parking brake (1) with screw (17), washer (16), and new
locknut (15).
6.
Reposition floor insulation on cab floor (13).
7.
Connect battery ground cable (WP 0121 00).
0102 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version