 |
|||
|
|
|||
|
Page Title:
MAGNETIC SPEED SENSOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0097 00
MAGNETIC SPEED SENSOR REPLACEMENT (Contd)
REMOVAL
1.
Remove nut (2) and two clamps (3) from engine (1).
2.
Remove connector (7) from magnetic speed sensor plug (6)
3.
Loosen jamnut (4) and remove sensor (5) from flywheel housing (8).
INSTALLATION
NOTE
Before tightening jamnut on sensor, adjust sensor 1-1/4 turns out
from flywheel. Nut functions as a jamnut to hold the sensor in
position.
1.
Install sensor (5) on flywheel housing (8) and tighten jamnut (4).
2.
Install sensor wires into two clamps (3) and install clamps (3) on engine (1) with nut (2).
3.
Install two leads 428 and 429 with connector (7) on magnetic speed sensor plug (6).
4.
Connect battery ground cable (WP 0121 00).
0097 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version