 |
|||
|
|
|||
|
Page Title:
ALTERNATOR (LEECE-NEVILLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0090 00
ALTERNATOR (LEECE-NEVILLE) MAINTENANCE (Contd)
REMOVAL
CAUTION
Never operate the alternator with output terminal (POS)
disconnected. Damage to alternator will result.
NOTE
Tag all wires for installation.
All waterproofing sealant must be removed from wires.
Locking hardware in steps 1 through 3 is provisioned with
alternator.
1.
Remove two screws (5), lockwashers (6), and cover plate (7) from block (9). Discard
lockwashers (6).
2.
Remove nut (1), lockwasher (2), and leads 2 (3) and 770-N (4) from stud (8). Discard
lockwasher (2).
3.
Remove screw (14), lockwasher (13), ground (GND) lead (12), and lead 770-P (11) from block (9).
Discard lockwasher (13).
4.
Disconnect lead 568 (16) from Y-connector (15).
5.
Remove screw (31) and lockwasher (30) from bracket (32) and alternator (10). Discard
lockwasher (30).
6.
Remove two screws (24), lockwashers (25), and alternator (10) from bracket (27). Discard
lockwashers (25).
7.
Remove two locknuts (17), screws (19), and bracket (32) from engine (18). Discard locknuts (17).
8.
Remove two screws (28), lockwashers (29), and bracket (27) from engine (18). Discard
lockwashers (29).
9.
Remove locknut (20) and washer (21) from alternator (10). Discard locknut (20).
10.
Using puller, remove pulley (22) and external fan (23) from alternator (10).
11.
Remove woodruff key (26) from alternator (10). Discard woodruff key (26).
0090 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version