 |
|||
|
|
|||
|
Page Title:
FAN ACTUATOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0085 00
FAN ACTUATOR REPLACEMENT (Contd)
REMOVAL
1.
Loosen nut (3) and remove fan actuator tube (2) with insert (5) and sleeve (4) from fitting (6) on
cylinder assembly (7).
2.
Remove locknut (9), washer (8), and cylinder assembly (7) from actuator hub (1). Discard
locknut (9).
INSTALLATION
1.
Install cylinder assembly (7) on actuator hub (1) with washer (8) and new locknut (9). Tighten
locknut (9) 84 lb-in (10 Nm).
2.
Install fan actuator tube (2) with insert (5) and sleeve (4) on fitting (6) and tighten nut (3).
3.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
1
2
3
4
5
~
6
7
8
9
END OF WORK PACKAGE
0085 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version