WATER PUMP REPLACEMENT - continued - TM-9-2320-386-24-1-10409

TM 9-2320-386-24-1-1

0080 00

WATER PUMP REPLACEMENT (Contd)

NOTE

Vehicles may come equipped with a Leece-Neville or Prestolite

alternator. STE/ICE-R wiring harness leads are connected to negative

and positive posts on either alternator.

21.

Connect lead 568 (17) to Y-connector (16).

22.

Install STE/ICE-R harness lead 770-N (12) and positive lead 2 (11) on stud (13) with new

lockwasher (10) and nut (9). Tighten nut (9) 45-55 lb-in. (5.1-6.2 Nm).

NOTE

Perform steps 23 and 24 for Prestolite alternators only.

23.

Install plate (3) on alternator (14) with two new lockwashers (2) and screws (1). Tighten screws (1)

30-35 lb-in. (3.4-3.9 Nm).

24.

Install cover plate (7) on alternator (14) with two new assembled-washer screws (8).

NOTE

Perform step 25 for Leece-Neville alternators only.

25.

Fill cover plate (7) or alternator wiring area with sealing compound and install cover plate (7) on

alternator (14) with two new lockwashers (19) and screws (18). Tighten screws (18) 30-35 lb-in.

(3.4-3.9 Nm).

26.

Install ground (GND) lead (4) and STE/ICE-R harness lead 770-P (15) on alternator (14) with new

lockwasher (5) and screw (6). Tighten screw (6) 83-102 lb-in. (9.4-11.5 Nm).

27.

Using a breaker bar, rotate belt tensioner (24) counterclockwise.

28.

Install fan drivebelt (22) on fan pulley (21), crankshaft pulley (23), and alternator pulley (20).

29.

Release belt tensioner (24).

30.

Connect battery ground cable (WP 0121 00).

31.

Fill radiator to proper level (WP 0068 00).

PRESTOLITE

0080 00-10