WATER PUMP REPLACEMENT - continued - TM-9-2320-386-24-1-10405

TM 9-2320-386-24-1-1

0080 00

WATER PUMP REPLACEMENT (Contd)

17.

Remove clamp (13) and heater hose (14) from fitting (8).

18.

Loosen clamp (22) and remove hose (1) from fitting (18).

19.

Remove three screws (15), washers (16), screw (12), washer (11), and alternator mounting plate (10)

from water pump (7).

20.

Remove tube (4) from elbow (5).

21.

Remove four screws (6) and water pump (7) from engine (21).

22.

Loosen clamp (3) and remove hose (2) from water pump (7).

23.

Remove sleeve (17) and sleeve (9) from alternator mounting plate (10).

24.

Remove O-ring (19) and O-ring (20) from water pump (7). Discard O-rings (19) and (20).

25.

Remove fitting (8), adapter (28), and O-ring (27) from water pump (7). Discard O-ring (27).

26.

Loosen nut (23) and remove elbow (5) and O-ring (24) from adapter (25). Discard O-ring (24).

27.

Remove adapter (25) and O-ring (26) from water pump (7). Discard O-ring (26).

28.

Remove fitting (18), adapter (30), and O-ring (29) from water pump (7). Discard O-ring (29).

INSTALLATION

Apply antiseize compound on male threads of fitting (18).

Install new O-ring (29), adapter (30), and fitting (18) on water pump (7).

Install new O-ring (27), adapter (28), and fitting (8) on water pump (7).

Install new O-ring (26), adapter (25), new O-ring (24), and elbow (5) on water pump (7) and tighten

nut (23).

Install new O-rings (19) and (20) on water pump (7).

Install sleeves (9) and (17) in alternator mounting plate (10).

Install hose (2) on water pump (7) and tighten clamp (3).

Install water pump (7) on engine (21) with four screws (6).

Install tube (4) on elbow (5).

10.

Install hose (1) on fitting (18) with clamp (22).

11.

Install mounting plate (10) on water pump (7) with three washers (16), screws (15), washer (11),

and screw (12).

12.

Install heater hose (14) on fitting (8) with clamp (13).

0080 00-6