 |
|||
|
|
|||
|
Page Title:
WATER REGULATOR HOUSING REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0079 00
WATER REGULATOR HOUSING REPLACEMENT (Contd)
REMOVAL
1.
Remove screw (1), washer (2), and clamp (4) from personnel heater tube (3).
2.
Loosen nut (5) and remove personnel heater tube (3) from adapter (6).
3.
Remove nut (11) and remove air compressor coolant line (12) from elbow (10).
4.
Remove screw (23), lockwasher (22), and ground lead (21) from bracket (24). Discard lockwasher (22).
5.
Remove two screws (16), washers (17), and bracket (24) from support bracket (18) and water
regulator housing (8).
6.
Remove two clamps (20) from hose (14).
7.
Remove two screws (25), water regulator housing (8), and gasket (13) from engine (19). Discard
gasket (13).
8.
Remove water regulator housing (8) and hose (14) from water pump (15).
9.
Remove elbow (10), adapter (6), and tee (7) from water regulator housing (8).
10.
Remove O-ring (9) from elbow (10). Discard O-ring (9).
INSTALLATION
1.
Apply sealant to male threads of elbow (10), adapter (6), and tee (7).
2.
Install new O-ring (9) on elbow (10).
3.
Install elbow (10), tee (7), and adapter (6) on water regulator housing (8).
4.
Install hose (14) on water pump (15) with two clamps (20). Do not tighten clamps (20).
5.
Position water regulator housing (8) on hose (14).
6.
Install new gasket (13) and water regulator housing (8) on engine (19) with two screws (25).
7.
Tighten two clamps (20).
8.
Install bracket (24) on water regulator housing (8) and support bracket (18) with two washers (17)
and screws (16).
9.
Install ground lead (21) on bracket (24) with new lockwasher (22) and screw (23).
10.
Install air compressor coolant line (12) on elbow (10) and tighten nut (11).
11.
Install personnel heater tube (3) on adapter (6) and tighten nut (5).
12.
Install clamp (4) on personnel heater tube (3) with washer (2) and screw (1).
13.
Install shutterstat air valve (WP 0083 00).
14.
Install engine temperature transmitter (WP 0114 00).
15.
Install coolant temperature quick-start switch (WP 0078 00).
16.
Install thermostat (WP 0077 00).
17.
Install surge tank (WP 0071 00).
18.
Connect battery ground cable (WP 0121 00).
0079 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version