 |
|||
|
|
|||
|
Page Title:
COOLANT TEMPERATURE QUICK-START SWITCH REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0078 00
COOLANT TEMPERATURE QUICK-START SWITCH REPLACEMENT (Contd)
REMOVAL
NOTE
Have drainage container ready to catch fluid.
1. Disconnect plug with leads 569B and ground (GND) (4) from coolant temperature quick-start
switch connector (3).
2. Remove coolant temperature quick-start switch (5) from tee (2) on water regulator housing (1).
INSTALLATION
1. Apply sealant to male threads of coolant temperature quick-start switch (5) prior to installation.
2. Install coolant temperature quick-start switch (5) on tee (2) at water regulator housing (1).
3. Connect plug with leads 569B and ground (GND) (4) to coolant temperature quick-start switch
connector (3).
4. Fill coolant system (WP 0068 00).
5. Connect battery ground cable (WP 0121 00).
6. Start engine (TM 9-2320-386-10) and inspect for leaks.
1
5
2
3
4
END OF WORK PACKAGE
0078 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version