 |
|||
|
|
|||
|
Page Title:
QUICK-START MOUNTING BRACKET REPLACEMENT (BUILT BEFORE SERIAL NO. 504924) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0058 00
QUICK-START MOUNTING BRACKET REPLACEMENT (BUILT BEFORE SERIAL NO. 504924) (Contd)
REMOVAL
1.
Remove locknut (20), screw (15), clamp (16), atomizer tee (17), and tube (18) from mounting
bracket (19). Discard locknut (20).
2.
Remove four screws (10), lockwashers (11), ground strap (5), lockwasher (4), and mounting
bracket (6) from engine (1). Discard lockwashers (11) and (4).
3.
Remove two locknuts (2), screws (12), washers (13), and clamp (14) from mounting bracket (6).
Discard locknuts (2).
4.
Remove two locknuts (3), screws (8), washers (7), and bracket (9) from mounting bracket (6).
Discard locknuts (3).
INSTALLATION
1.
Install bracket (9) on mounting bracket (6) with two washers (7), screws (8), and new locknuts (3).
2.
Install clamp (14) on mounting bracket (6) with two washers (13), screws (12), and new locknuts (2).
3.
Install mounting bracket (6), new lockwasher (4), and ground strap (5) on engine (1) with four new
lockwashers (11) and screws (10).
4.
Install tube (18) and atomizer tee (17) on mounting bracket (19) with clamp (16), screw (15), and
new locknut (20).
5.
Install quick-start cylinder and valve (WP 0055 00).
0058 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version