 |
|||
|
|
|||
|
Page Title:
FUEL FILTER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0054 00
FUEL FILTER MAINTENANCE (Contd)
.WARNING.
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame, sparks, or electricity. Injury to personnel may
result.
DRAINING
NOTE
Have drainage container ready to catch fuel.
1.
Open drainvalve (4) and drain fuel from fuel filter (1).
2.
Close drainvalve (4).
REMOVAL
Remove fuel filter (1) from fuel/water separator (3). Discard fuel filter (1).
CLEANING AND INSPECTION
.WARNING.
Skysol-100 mixture is combustible. Use mechanical ventilation
whenever product is used in a confined space, is heated above
ambient temperatures, or is agitated. DO NOT use or store near
heat, sparks, flame, or other ignition sources. Keep container
sealed when not in use.
Contact with Skysol-100 may cause skin irritation. Use chemical
resistant gloves. In case of skin contact, remove any contaminated
clothing and wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may cause
irritation, tearing, or blurring of vision. Use face shield or goggles
when eye contact may occur. In case of eye contact, flush eyes
with large amounts of water for at least fifteen (15) minutes or
until irritation subsides. Inhalation may cause irritation to upper
respiratory passages. DO NOT have food or drink in the vicinity.
1.
Clean sealing area (5) of fuel/water separator (3) with Skysol-100.
2.
Apply clean lubricating oil to sealing area (5) of fuel/water separator (3).
INSTALLATION
1.
Install new fuel filter (1) on fuel/water separator (3) until O-ring (2) touches fuel/water
separator (3).
2.
Hand-tighten fuel filter (1) an additional three-quarters of a turn.
3.
Start engine (TM 9-2320-386-10) and inspect fuel system for leaks.
0054 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version