 |
|||
|
|
|||
|
Page Title:
FUEL VENT LINE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0049 00
FUEL VENT LINE REPLACEMENT (Contd)
REMOVAL
.WARNING.
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame, sparks, or electricity. Injury to personnel may
result.
CAUTION
When disconnecting air lines and hoses, plug all openings to
prevent dirt from entering and causing damage to internal parts.
Remove all plugs prior to installation.
1.
Loosen nut (3) and remove fuel tank vent line (2) from vent valve (4) on fuel tank (5).
2.
Remove tiedown strap (9), four screws (6), clamps (7), and fuel tank vent line (2) from cab (8).
Discard tiedown strap (9).
3.
Pull fuel tank vent line (2) through right frame rail (1) and remove from vehicle.
INSTALLATION
1.
Route fuel tank vent line (2) through right frame rail (1) and connect fuel tank vent line (2) to vent
valve (4) on fuel tank (5) and tighten nut (3).
2.
Install four clamps (7) on fuel tank vent line (2) and other two vent lines and secure to cab (8) with
four screws (6).
3.
Secure three vent lines into a loop with new tiedown strap (9).
0049 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version