 |
|||
|
|
|||
|
Page Title:
FUEL TANK LINES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0048 00
FUEL TANK LINES REPLACEMENT (Contd)
INSTALLATION
NOTE
The fuel return line is the smaller of the two fuel lines.
1.
Position fuel return line (1) and fuel inlet line (9) in vehicle.
2.
Connect fuel return line (1) to elbow (2).
3.
Connect fuel inlet line (9) to elbow (3).
4.
Route fuel inlet line (9) and fuel return line (1) through openings in crossmember (20) and rear
crossmember (15) at fuel tank (10).
5.
Connect fuel return line (1) to elbow (13) on fuel tank (10).
6.
Connect fuel inlet line (9) to elbow (14) on fuel tank (10).
7.
Install clamp (24) on fuel return line (1) and fuel inlet line (9).
8.
Install clamp (24) with fuel return line (1) and fuel inlet line (9) and bracket (28) on left frame
rail (27) with screw (22) and new locknut (23).
9.
Connect spring (29) to bracket (28) on left frame rail (27).
10.
Install fuel inlet line (9) and fuel return line (1) on crossmember (20) with two clamps (26),
screws (25), four washers (21), and two new locknuts (19).
11.
Install fuel inlet line (9) and fuel return line (1) on right frame rail (12) with clamp (16), screw (17),
and new locknut (11).
12.
Install new tiedown straps (18) on fuel inlet line (9) and fuel return line (1) as necessary.
13.
Install fuel inlet line (9) and fuel return line (1) on bracket (6) with two clamps (5), screw (4),
washer (7), and new locknut (8).
14.
Install vent line (WP 0049 00).
15.
Start engine (TM 9-2320-386-10) and inspect fuel system for leaks.
7
8
6
5
4
3
2
1
9
0048 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version