 |
|||
|
|
|||
|
Page Title:
FUEL TANK LINES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0048 00
FUEL TANK LINES REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame, sparks, or electricity. Injury to personnel may
result.
REMOVAL
1.
Remove tiedown straps (5) from fuel lines (1) and (2) as necessary. Discard tiedown straps (5).
CAUTION
Cap or plug all hoses, connections, and openings immediately after
disconnection or component removal to prevent contamination.
Failure to do so may result in damage to equipment.
NOTE
The fuel return line is the smaller of the two fuel lines coming from
elbows on top of fuel tank.
2.
Disconnect fuel return line (1) from elbow (21) on fuel tank (18).
3.
Disconnect fuel inlet line (2) from elbow (22) on fuel tank (18).
4.
Remove locknut (19), screw (4), and clamp (3) from right frame rail (20). Discard locknut (19).
5.
Remove two locknuts (6), washers (8), screws (16), washers (8), and clamps (17) from crossmember (7).
Discard locknuts (6).
6.
Disconnect spring (25) from bracket (24) on left frame rail (23).
7.
Remove locknut (10), screw (9), bracket (24), and clamp (11) with fuel lines (1) and (2) from left
frame rail (23). Discard locknut (10).
8.
Remove fuel return line (1) and fuel inlet line (2) from clamp (11).
9.
Disconnect fuel inlet line (2) from elbow (27).
10.
Disconnect fuel return line (1) from elbow (26).
11.
Remove locknut (15), washer (14), screw (13), two clamps (12), fuel return line (1), and fuel inlet line (2)
from bracket (28). Discard locknut (15).
12.
Remove fuel return line (1) and fuel inlet line (2) from vehicle.
0048 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version