 |
|||
|
|
|||
|
Page Title:
TURBOCHARGER OIL INLET TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0043 00
TURBOCHARGER OIL INLET TUBE REPLACEMENT (Contd)
REMOVAL
CAUTION
Cap or plug all openings to prevent contaminants from entering
engine or turbocharger. Failure to do so may result in
turbocharger and/or engine damage.
1.
Disconnect oil inlet tube (2) from elbow (4).
2.
Remove two screws (1), washers (9), oil inlet tube (2), gasket (8), and O-ring (3) from turbocharger (7)
and elbow (4). Discard gasket (8) and O-ring (3).
3.
Remove elbow (4) and O-ring (5) from engine (6). Discard O-ring (5).
INSTALLATION
1.
Install new O-ring (5) and elbow (4) on engine (6).
2.
Position new O-ring (3) on oil inlet tube (2).
3.
Install new gasket (8) and oil inlet tube (2) on turbocharger (7) with two washers (9) and screws (1).
4.
Connect oil inlet tube (2) to elbow (4).
5.
Install air cleaner hoses (WP 0038 00).
6.
Start engine (TM 9-2320-386-10) and check for leaks.
0043 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version