 |
|||
|
|
|||
|
Page Title:
TURBOCHARGER OIL DRAIN TUBE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0042 00
TURBOCHARGER OIL DRAIN TUBE MAINTENANCE (Contd)
REMOVAL
CAUTION
Cap or plug all openings to prevent contaminants from entering
engine or turbocharger. Failure to do so may result in
turbocharger and/or engine damage.
1.
Remove two clamps (3) and vacuum hose (4) from elbow (2) and canister (5).
NOTE
Note location and position of oil sampling valve for installation.
Have drainage container ready to catch oil.
2.
Remove oil sampling valve (7) from coupling (6).
3.
Remove two screws (10) from bottom of oil drain tube assembly (11) and engine (9).
4.
Remove two screws (12), washers (13), oil drain tube assembly (11), and gasket (14) from
turbocharger (1). Discard gasket (14).
DISASSEMBLY
1. Remove O-ring (18) from adapter (17). Discard O-ring (18).
2.
Remove oil drain tube (15) and O-ring (16) from adapter (17). Discard O-ring (16).
ASSEMBLY
1. Install new O-ring (16) and oil drain tube (15) on adapter (17).
2.
Install new O-ring (18) in groove of adapter (17).
INSTALLATION
1. Install new gasket (14) and oil drain tube assembly (11) with adapter (17) on turbocharger (1) with
two washers (13) and screws (12).
2. Install bottom of oil drain tube assembly (11) on engine (9) with two screws (10).
3. Install oil sampling valve (7) on coupling (6).
4. Install vacuum hose (4) on elbow (2) and canister (5) with two clamps (3).
CAUTION
Ensure oil is added before operating vehicle. Failure to do so may
result in damage to turbocharger bearings.
5.
Pour 2 oz (59 mL) of lubricating oil into turbocharger (1) through oil inlet tube port (8).
6.
Install turbocharger oil inlet tube (WP 0043 00).
7.
Start engine (TM 9-2320-386-10) and check for leaks.
0042 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version