 |
|||
|
|
|||
|
Page Title:
ENGINE OIL FILLER TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0031 00
ENGINE OIL FILLER TUBE REPLACEMENT (Contd)
REMOVAL
1.
Remove cap (1) from filler tube (14).
2.
Remove locknut (4), washer (3), screw (10), washer (3), two clamps (13), fuel hoses (11) and (12),
and dipstick tube standoff bracket (2) from stabilizer bracket (5). Discard locknut (4).
3.
Remove two screws (9), washers (8), filler tube (14), and gasket (7) from side cover (6). Discard
gasket (7).
INSTALLATION
1.
Install new gasket (7) and filler tube (14) on side cover (6) with two washers (8) and screws (9).
2.
Install dipstick tube standoff bracket (2) and fuel hoses (11) and (12) with two clamps (13) on
stabilizer bracket (5) with two washers (3), screw (10), and new locknut (4).
3.
Install cap (1) on filler tube (14).
4.
Start engine (TM 9-2320-386-10) and check for leaks.
3
4
5
1
2
14
12
13
11
3
10
9
6
8
7
END OF WORK PACKAGE
0031 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version