 |
|||
|
|
|||
|
Page Title:
FRONT ENGINE MOUNTING PAD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0027 00
FRONT ENGINE MOUNTING PAD REPLACEMENT (Contd)
REMOVAL
1.
Remove screw (6), lockwasher (5), and washer (4) from crossmember (7) and front engine mount (1).
Discard lockwasher (5).
WARNING
Use suitable supporting device at front engine mount when
removing mounting pad. Lifting device failure may cause injury to
personnel.
2.
Using a lifting device, raise engine (8) from crossmember (7).
3.
Remove washer (2) and rubber mounting pad (3) from crossmember (7).
4.
Lower engine (8) and remove lifting device.
INSTALLATION
WARNING
Use suitable supporting device at front engine mount when
installing mounting pad. Lifting device failure may cause injury to
personnel.
1.
Using a lifting device, raise engine (8) from crossmember (7).
2.
Apply a detergent and water solution to rubber mounting pad (3).
3.
Partially position rubber mounting pad (3) on crossmember (7) by pressing down on rubber
mounting pad (3) and rotating.
4.
Position washer (2) on rubber mounting pad (3) and lower engine (8) to seat rubber mounting
pad (3) on crossmember (7).
5.
Align hole of crossmember (7) with hole of engine mount (1) and install washer (4), new lock-
washer (5), and screw (6). Tighten screw (6) 240 lb-ft (325 Nm).
6.
Install radiator and mounts (WP 0069 00).
0027 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version