TORQUE WRENCH ADAPTERS - TM-9-2320-361-24-21110

TM 9-2320-361-24-2

0472 00

TORQUE LIMITS (Contd)

TUBING APPLICATION TIGHTENING ASSEMBLY INSTRUCTIONS (Contd)

COPPER TUBING FOR

HAND AIRBRAKE

Slide nut and then sleeve on tubing. Threaded

end of nut B must face out.

Insert tubing into fitting. Ensure tubing is

bottomed on fitting shoulder.

Thread nut onto fitting body until it is hand

tight.

From that point, tighten with a wrench the

number of turns indicated at right.

TORQUE WRENCH ADAPTERS

Some tasks require the use of a torque wrench adapter when the nut or screw cannot be reached with a

regular socket on the end of the torque wrench. These adapters add to the overall length of the torque

wrench and make the dial or scale reading less than actual torque applied to the nut or screw. To

prevent over torquing and damage to equipment, calculate correct dial or scale reading using the

conversion formula on the following page.

0472 00-6