|
|
TM 9-2320-361-24-2
0462 00
VAN BODY MAINTENANCE (Contd)
REMOVAL
1.
Disconnect lead (7) from circuit breaker (2).
2.
Remove screw (5) from clamp (6).
3.
Remove screw (4) from bond assembly (3).
NOTE
Perform step 4 if van body is equipped with heater.
Have drainage container ready to catch fuel.
4.
Loosen nut (9) and disconnect fuel line (8) from elbow (1). Allow excess fuel to drain into container.
5.
Remove six locknuts (18) and screws (17) from six mounting brackets (16). Discard locknuts (18).
NOTE
Step 6 applies to M109A3 vehicles only.
6.
Remove four locknuts (10), screws (15), washers (14), and springs (13) and (12) from two mounting
brackets (11). Discard locknuts (10).
NOTE
Step 7 applies to M185A3 vehicles only.
7.
Remove four locknuts (19), screws (21), eight spring keepers (20), four springs (22), and
springs (23) from two mounting brackets (11). Discard locknuts (19).
0462 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |