 |
|||
|
|
|||
|
Page Title:
STEERING GEAR REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0458 00
STEERING GEAR REPAIR (Contd)
DISASSEMBLY
1.
Remove six screws (11), washers (12), side cover (13), and gasket (7) from gear housing (4).
Discard gasket (7).
2.
Remove plug (8), nut (10), and preload screw (9) from side cover (13).
3.
Clamp gear housing mounting flange (3) in vise with gear tube (14) in up position.
CAUTION
All dirt and grease must be removed from exposed pitman shaft
end prior to removal. Failure to clean pitman shaft end may
result in scoring of shaft bushings.
4.
Remove pitman shaft (6) from gear housing (4).
NOTE
Steering gear may have one or more shims under tube cover.
Tag shim(s) in order removed for installation.
5.
Remove four screws (15), washers (16), gear tube cover (17), gear tube (14), gasket (18),
shim(s) (19), and gasket (18) from cam (22). Discard gaskets (18).
CAUTION
When removing cam from bearing cup bores, do not chip cam
grooves, or wedge cam bearings against gear housing. Damage
to cam, cam bearings, or gear housing may result.
6.
Remove cam (22) from gear housing (4) and end cover tube (25).
7.
Remove cam bearing (21) and cup (20) from cam (22).
8.
Remove cam bearing (23) and cup (24) from cam (22).
CAUTION
Do not score pitman shaft bushings when removing oil seal from
gear housing. Damaged bushings may score pitman shaft.
9.
Remove seal (1) from gear housing (4). Discard seal (1).
10.
Remove plugs (2) and (5) from gear housing (4).
0458 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version