DIFFERENTIAL CARRIER REPAIR - continued

TM 9-2320-361-24-2

0455 00

DIFFERENTIAL CARRIER REPAIR (Contd)

ASSEMBLY AND ADJUSTMENT (Contd)

16.

Using bearing sleeve remover/replacer and screw, align hole in sleeve (1) with setscrew (7) hole in

carrier (2) and install sleeve (1) in carrier (2).

17.

Install setscrew (7) in carrier (2) and sleeve (1).

NOTE

Install bearing with beveled side toward gear.

18.

Press bearing (4) on bevel gear (3).

19.

Install spacer (8) on bevel gear (3) until seated against bearing (4).

CAUTION

Use brass drift to install bevel gear. Failure to do so may result

in damage to gear.

20.

Install bevel gear (3) in carrier (2) so bevel gear (3) rests in sleeve (1).

21.

Install new woodruff key (6) on helical pinion shaft (5).

CAUTION

Use soft metal spacers to securely support bevel gear on sleeve

during installation. The bevel gear must not be able to move

within the housing. Failure to do so may result in damage to

bevel gear and/or housing.

NOTE

Ensure alignment of key in helical pinion shaft with keyway in

bevel gear.

22.

Press pinion shaft (5) through carrier (2) into bevel gear (3).

0455 00-16