60-AMPERE ALTERNATOR REPAIR - continued

TM 9-2320-361-24-2

0448 00

60-AMPERE ALTERNATOR REPAIR (Contd)

DISASSEMBLY (Contd)

15.

Remove tiedown strap (1) from three leads (2). Discard tiedown strap (1).

16.

Disconnect lead (20) from output plate stud (6).

17.

Remove insulating compound from four rectifier terminals (10) and three rectifier terminals (16).

18.

Unsolder and disconnect six positive rectifier leads (11) from four positive rectifier terminals (10).

19.

Remove three screws (12), washers (13), nylon washers (14), positive rectifier plate (9), and positive

rectifier insulator (8) from end housing (3).

20.

Unsolder and disconnect three negative rectifier leads (15) from three negative rectifier

terminals (16).

21.

Remove two screws (17), washers (18), and negative rectifier plate (19) from end housing (3).

22.

Remove four screws (4), output plate (5), O-ring (7), six positive rectifier leads (11), three negative

rectifier leads (15), and leads (2) from end housing (3). Discard O-ring (7).

23.

Scribe locating marks (24) on intermediate housing (23), stator (22), and drive end housing (21).

0448 00-6