 |
|||
|
|
|||
|
Page Title:
PERSONNEL HEATER FUEL CONTROL VALVE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0428 00
PERSONNEL HEATER FUEL CONTROL VALVE MAINTENANCE (Contd)
REMOVAL
NOTE
Prior to removal, tag lead wires for installation.
1.
Remove nut-assembled lockwasher (8), screw (4), and clamp (5) from ignition control unit (9).
Discard nut-assembled lockwasher (8).
2.
Remove elbow (12) and nipple (11) from fuel control valve (10).
3.
Remove screw-assembled lockwasher (1) and restriction solenoid lead (2) from receptacle (3).
Discard screw-assembled lockwasher (1).
4.
Remove nut-assembled lockwasher (21) and shutoff valve lead (6) from overheat switch (17).
Discard nut-assembled lockwasher (21).
5.
Remove nut-assembled lockwasher (20), thermostat lead (19), receptacle lead (7), and ignition
control lead (18) from overheat switch (17). Discard nut-assembled lockwasher (20).
6.
Remove clamp (5) from wires (6), (2), and (7).
7.
Loosen nut (16) and disconnect fuel line (15) from fuel control valve (10).
8.
Remove four screws (13) and fuel control valve (10) from heater housing (14).
INSPECTION
Visually inspect fuel control valve (10) for dents or loose wires. Replace fuel control valve (10) if
damaged.
INSTALLATION
1.
Install fuel control valve (10) on heater housing (14) with four screws (13).
2.
Install fuel line (15) on fuel control valve (10). Tighten nut (16).
3.
Slide clamp (5) over wires (6), (2), and (7).
4.
Install restriction solenoid lead (2) on receptacle (3) with new screw-assembled lockwasher (1).
5.
Install ignition control lead (18), receptacle lead (7), and thermostat lead (19) on overheat
switch (17) with new nut-assembled lockwasher (20).
6.
Install shutoff valve lead (6) on overheat switch (17) with new nut-assembled lockwasher (21).
7.
Install clamp (5) on ignition control unit (9) with screw (4) and new nut-assembled lockwasher (8).
8.
Install nipple (11) and elbow (12) on fuel control valve (10).
9.
Install personnel heater guard (WP 0427 00).
10.
Connect battery ground cable (WP 0126 00).
11.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0428 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version