 |
|||
|
|
|||
|
Page Title:
ENGINE COOLANT HEATER FUEL CONTROL VALVE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0421 00
ENGINE COOLANT HEATER FUEL CONTROL VALVE REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, tag lead wires for installation.
1.
Remove four screws (8) and guard (7) from heater housing (6).
2.
Remove nut-assembled lockwasher (2), ground lead (3), air tube (4), and elbows (1) and (5) from
heater housing (6). Discard nut-assembled lockwasher (2).
3.
Disconnect fuel control valve leads (9) and (10) from tab connector (19).
4.
Loosen nut (16) and slide down fuel tube (15).
5.
Remove screw-assembled lockwasher (22) and lead (21) from heater component bracket (20).
Discard screw-assembled lockwasher (22).
6.
Remove screw-assembled lockwasher (11) and lead (17) from flame detector switch (18). Discard
screw-assembled lockwasher (11).
7.
Remove two screw-assembled lockwashers (13) and fuel control valve (12) from bracket (14).
Discard screw-assembled lockwashers (13).
INSTALLATION
1.
Position fuel control valve (12) on fuel tube (15) and bracket (14).
2.
Tighten nut (16) and install fuel control valve (12) on bracket (14) with two new screw-assembled
lockwashers (13).
3.
Install lead (21) on heater component bracket (20) with new screw-assembled lockwasher (22).
4.
Install lead (17) on flame detector switch (18) with new screw-assembled lockwasher (11).
5.
Connect fuel control leads (9) and (10) on tab connector (19).
6.
Install air tube (4), elbows (1) and (5), and ground lead (3) on heater housing (6) with new
nut-assembled lockwasher (2).
7.
Install guard (7) on heater housing (6) with four screws (8).
8.
Install engine coolant heater (WP 0357 00).
9.
Connect battery ground cable (WP 0126 00).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0421 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version