 |
|||
|
|
|||
|
Page Title:
SPEAKING TUBE REPLACEMENT (M35A2) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0411 00
SPEAKING TUBE REPLACEMENT (M35A2) (Contd)
REMOVAL
1.
Remove three screws (9) from mouthpiece (8), spacer (7), and cab wall (6).
2.
Loosen set screws (10) and remove mouthpiece (8) from speaking tube (16).
3.
Remove spacer (7) from speaking tube (16).
4.
Remove speaking tube (16) from cab wall (6), ring assembly (1), tarpaulin cone (2), clamp (3), and
clip (12).
5.
Remove two nuts (11), washers (13), two screws (14), and clip (12) from front cargo rack (15).
6.
Remove front cargo rack (15).
7.
Remove nut (5), screw (4), clamp (3), and ring assembly (1) from tarpaulin cone (2).
INSTALLATION
1.
Install ring assembly (1) in tarpaulin cone (2) with clamp (3), screw (4), and nut (5).
2.
Install front cargo rack (15).
3.
Install clip (12) to front cargo rack (15) with two screws (14), washers (13), and nuts (11).
4.
Install speaking tube (16) to clip (12), through front cargo rack (15), tarpaulin cone (2), ring
assembly (1), and cab wall (6).
5.
Install spacer (7) on speaking tube (16).
6.
Install mouthpiece (8) on speaking tube (16) with set screws (10).
NOTE
Assistant will help with step 7.
7.
Secure mouthpiece (8) to spacer (7), cab wall (6), and ring assembly (1) with three
screws (9).
8.
Connect battery ground cable (WP 0126 00).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0411 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version