 |
|||
|
|
|||
|
Page Title:
STEERING ASSIST CYLINDER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0408 00
STEERING ASSIST CYLINDER MAINTENANCE (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
CAUTION
When disconnecting air lines and hoses, plug all openings
to prevent dirt from entering and causing damage to
internal parts.
NOTE
Prior to removal, tag all air lines and hoses for installation.
1.
Battery ground cable disconnected (WP 0126 00).
2.
Raise vehicle (TM 9-2320-361-10) and place jack stands under front axle. Lower vehicle onto
jack stands.
3.
Remove tiedown straps (1) along air hoses (20) and (2) as required. Discard tiedown straps (1).
4.
Remove air hose (20) from elbow (19).
5.
Remove air hose (2) from adapter (3).
6.
Remove elbow (19) and adapter (3) from steering assist cylinder (12).
7.
Remove six jamnuts (13) from screws (17)
NOTE
Support steering assist cylinder during removal.
8.
Remove six nuts (14), tie rod top bracket (15), six screws (17), and tie rod bottom bracket (16) from
tie rod (18).
NOTE
Assistant will help with step 8.
9.
Remove locknut (10), washer (9), screw (4), washer (5), support bracket (6) with air hose (2), and
steering assist cylinder (12) from axle bracket (8). Discard locknut (10).
10.
Remove two spacers (7) and pull steering assist cylinder (12) with rubber bearing shields (11) from
axle bracket (8).
0408 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version